CSI

CUTTING SYSTEMS INC
DL-4400

This saw has what CSI calls a
dog log (DL) style saw box
which gives the loader operator
a better view.
DL-4200

This saw has a low-profile saw
box for better visibility and a belt
drive for smooth and fast cut
cycles.
SLASHER       
  SAWS
DELIMBERS
This 4-knife pull-thru delimber comes
equipped with an integrated topping
saw. It is suited for use in hardwood
or pine. The 72" wide throat opening, a
special roller, and our unique knife
design makes delimbing trees smooth
and easy. It comes mounted on a
cradle constructed of high alloy steel.
We also use top quality rotation
bearings, pivot bushings, and rollers.
Its ease of operation yields maximum
production.
Dimensions:
Length … 8'-0" (96")
Width  … 7'-3" (87")◦
Weight … 8,700 lbs
Height … 8'-2" (98")

Topping-saw:
◦44" Roller-tip Saw Bar
◦3/4 Pitch - 68 Link Saw
Chain, Direct Driven
◦Automatic, Piston Actuated
Saw Chain Oiler
◦2.5 Gallon Oil Reservoir
Capacity
PTD-264 ULTRA
PTD-264 NTS
Our PTD-264-NTS is designed with the
same rugged features and quality as our
PTD-264, without the integrated topping
saw for operators who do not require that
option.
◦Dimensions:
◦Length … 7'-7" (91")
◦Width  … 6'-10" (82")
◦Weight … 7,000 lbs. (approx)
◦Height … 7'-5" (89")

◦Standard Equipment:
◦Heavy-wall High Strength Structural
Frame Tubing
◦High Alloy Steel Body Plate
◦Four High Alloy Wear Hardening Steel
Knives
PTD-203
◦Dimensions:
◦Length … 6'-11" (83")
◦Width  … 6'-10" (82")
◦Weight … 6,500 lbs.
◦Height … 7'-3" (87")

◦Topping-saw:
◦44" Roller-tip Saw Bar
◦3/4 Pitch - 68 Link Saw Chain, Direct Driven
◦Automatic, Piston Actuated Saw Chain
Oiler
◦2.5 Gallon Oil Reservoir Capacity
CSI-3018
DELIMBING GATE
The PTD-203 has a lightweight,
compact design

This 3-knife pull-thru delimber
features a 20" throat opening. It
is designed for less productive
contractors harvesting pine and
hardwood using smaller knuckle
boom loaders.

Available with or without a
topping saw
◦Log Accommodation:
◦4" Minimum Incircled (Dia.)
◦26" Maximum Incircled (Dia.)
◦18" Pull-Assist Roller (Dia.)
* Larger diameters
accomidated, but not
completely incircled.

◦Structural:
◦100% Hi-alloy Steel
◦Heavy-Wall High-Strength
Frame Tubing
◦Four, Hi-alloy, Wear
Hardening Steel Knives

◦Log Accommodation:
◦3" Minimum Incircled (Dia.)
◦18" Maximum Incircled (Dia.)
◦15" Pull-Assist Roller (Dia.)

* Larger diameters accomidated, but not
completely incircled.

◦Structural:
◦100% Hi-alloy Steel
◦Heavy-Wall High-Strength Frame Tubing
◦Three, Hi-alloy, Wear Hardening Steel
Knives
Dimensions:
◦Length … 18'-6" (222")
◦Width  … 6'-5" (78")
◦Weight … 3,000 lbs. (approx)
◦Height … 5'-10" (70")
◦Top openings … 19" X 19"
◦Bottom openings … 19" X 29"
Standard Features:
◦Constructed of thick-wall, square &
rectangular tubing
◦Vertical breakers are turned 45 degrees
so   that corners face forward
◦1/2" X 10" Ramp
◦Contoured ground cleats
◦Bottom openings are taller to allow for
debris build-up
CHECK OUT THE LINE OF
DELIMBING TRAILERS AT THE CSI
WEBSITE
www.cuttingsys.com
DELIMBING
ACCESSORIES
    To learn more about this new                
       equipment scroll down to the
           bottom of this page!!!
DANGLE FELLING HEAD DFH-3526
The model DFH-3526 is a rugged and robust
chain and bar dangle felling saw head
designed for use on excavator type
carriers.       The head is expertly designed
and built from the finest alloy steel to
withstand  
the daily punishment of a felling operation.

The head is equipped with a 3/4 pitch chain
running on a 37" bar. The model DFH-3526
will cut a 26" tree at a single pass or cut a
35" tree with multiple passes.

The arms are designed to allow the
operator to pick up the tree after it has
fallen and remove the big limbs, top, and
shovel log the tree stem into position where
the skidder has easy access for skidding to
the landing.
For pricing and
ordering please
contact us at

606-523-9480
HOMEPAGE