PRECISION CHIPPERS
Precision's spout design with a flat bottom and
canted side gives 25% more anvil contact with
the log. This provides absolute control of the log,
preventing slapping and wood turning.

Both horizontal and vertical anvils give additional
life with less maintenance. Both are hard
surfaced with colmonoy which has a hardness of
62 to 65 on the Rockwell C scale.   
Drop feed with top discharge
Horizontal feed with
rechipper spout,
top discharge.
FEED
Horizontal and / or Drop
DISCHARGE
Top, bottom, end or back
RECHIPPER SPOUTS
8" x 8" [203mm x 203mm] , 10" x 10"
[254mm x 254mm]or 15" x 15" [381 x
381mm]
Vee Bottom Rechipper Spouts
DISC BRAKE
HYDRAULIC HOOD OPENER
HEAVY-DUTY PACKAGE
DISSIPATOR FOR REAR DISCHARGE
ROUNDWOOD CHIPPER
OPTIONS FOR ALL ROUNDWOOD CHIPPERS
WASTE WOOD CHIPPER



Precision chippers are more efficient,
producing consistently sized chips with
greater capacity.

The 38" will accommodate a 20" slab and 9"
roundwood.
The 48" takes 24" slabs and 11" roundwood.
The 58" takes 34" slabs and 15"roundwood.
The 66" takes 38" slabs and 17" roundwood.
THE BEST CHIPPER IN THE WORLD
World Leader in Performance, Durability, and
Installations
CHIPPER SIZES    #OF KNIVES
        38                       4

        48                 3,4,6, or 8

        58                   3,4,  or 6

        66                 3,4,6, or 8
Options for Precision
Chippers
Dissipator for rear
discharge
The circular movements of the
chips greatly reduce the force
of the chip flow and chips are
spread more evenly. Available
for all four chipper sizes. Cyclone
sizes from 4' to 8' [1.2m to 2.4m]
in diameter.
Drop or Gravity Feed Chipper

OPTIONS:
Horizontal Feed or Drop Feed
Left or Right
Discharge - Top, bottom, end or
back
360 deg. Swivel discharge for
trailer loading.
The canted side spout design and
the position of the knife causes a
smooth slicing action. The attack
angle of the knife gives a gentle lift
to the slab as the knife passes the
center line and begins the upward
swing turning the slab
counterclockwise. The spout has a
flat bottom and canted side to give
25 % more anvil contact, preventing
slapping and wood turning in the
wrong direction. Horizontal and
vertical anvils give additional life,
requiring less maintenance. Both
anvils are hard surfaced with
Colmonoy with a hardness of 62 -
65, Rockwell C scale. With a four
sided replaceable anvil,
maintenance and time are saved.
Less horsepower is needed with
Precision's smoother action.
SLICING INSTEAD OF
CHOPPING
For more
information and
ordering one of
these products
please contact us
at

606-523-9480
KWIK-CHIP
KWIK-CHIP, the most
famous chipper and screen
unit in the world. Hundreds
of units are operating in
wood producing countries
around the globe.
Engineered for easy
maintenance and
installation. Built in sizes
from 38" [965mm] to 75"
[1900mm], electric or diesel.
THE MOST FAMOUS CHIPPER AND SCREEN UNIT IN THE WORLD

KWIK-CHIP components can be positioned to fit your existing space. These
four arrangements are the most common. Other arrangements may be
specified, all available in left or right-hand configurations.
Chipper and screen are engineered for ease of maintenance in sizes 38"
[965mm] to 75" [1900mm] . Size configurations to 66" [1674mm] are shown.
Larger size units are produced and the component parts can be located to fit
existing systems.
Utilizing the exclusive Precision TRUE-SLICE chipper, which produces uniform
chips with less horsepower. KWIK-CHIP operates in mills with capacities from 6
to 200 MBF [1830m to 61,000m of lumber] per shift.